Court Planner — Apex build

Slab

Length (E–W) 60 ft Width (N–S) 30 ft

Basketball hoop

Pole offset behind baseline 2 ft

0' = pole flush with slab; backboard cantilevers 4' inside (regulation). 2' = backboard cantilevers 2' inside.

Basketball lines

Lighting

Wattage per LED 300 W

Lightmart presets: 200W with 15ft poles, 300W with 20ft poles.

Pole offset from slab 3 ft

Spread along court (2-pole) ±0 ft

0 = both at midline. Increase to split poles apart along the court — south pole shifts west, north shifts east. Useful when a long-side basketball hoop sits at the midline.

Distance from each end (4-pole) 15 ft

Lightmart spec puts these at ~11 ft from baseline. Smaller = poles toward corners. Larger = poles toward midline.

Foot-candle heat map

Show dimensions

Show light aim cones

0 fc

01020305080120

200+ fc

Pickleball Non-volley zone Basketball lines Light pole Hoop pole

Slab

Footprint60 × 30 ft

Area1,800 ft²

Pickleball

Play area20 × 44 ft

Side run-off5 ft

End run-off8 ft

USAPA minYes

Basketball

Backboard inset2 ft from baseline

3-pt arc radius19'9"

Far-side clearance—

Lighting · this config

Configuration2 poles, 20 ft

Total system power1,200 W

Total system lumens170 k

Lightmart photometric

Avg illuminance— fc

Min illuminance— fc

Max:Min ratio—

Vertical at net— fc

ASBA target30 fc · ≤2.0

Heat-map model

Avg illuminance— fc

Min illuminance— fc

Max:Min ratio—

Lightmart photometric values come from the LSPB1/LSPB2 spec sheets — authoritative for the 22×44 ft pickleball court. Scaled linearly with wattage; ratio is invariant.

Heat-map model uses a cos³ Type-4 beam approximation aimed at the court center (4-pole) or court halves (2-pole). Useful for visualizing how light bleeds onto the basketball half-court and where dark spots will land on a custom slab size — but absolute fc numbers may differ from the manufacturer's IES study by 20–40%.